What is going on in bare feet all the excitement these days? We all need to feel more and more. Why? Ask a simple question, you should only have a simple answer, which is not likely to happen in today's complicated world. Yes, I know the craze came and went barefoot many times over the decades, but this time something is different. Today we own a horse that has evolved to do, and with this development, is becoming a growing desire to take direct responsibilitycare of their horses stations.
Do not get me wrong, I'm not a fanatic barefoot. I'll be the first to admit that shoeing is here to stay. There is always in need of protection, traction and stability. The question that arises is: has our profession and science to keep pace with these changes in the industry? Our science is a model that can effectively meet the needs of today's horse owners, those who have their horses go barefoot? These were the questions thatgrieved in my development of the Theory of Hoof Dynamics6 suspension. I had and after investigations it is clear that he also many flaws in the foundation of science, we asked.
Frustration best describes my mind set prior to the development of the HPT model. I think that what we call base today, "Imperfectly Natural Hoof Care". Finally, none of us perfect. Coupled with the domestication and can thus "imperfect" works. We, asExperts are called within the parameters of practical natural hoof care and this is a huge imposition, if the environments that we created for the modern horse.
Description of the HPT model and the theories on which is beyond the scope of this document. What I hope to do with this work is to provide new insights in Applied Equine Podiatry, the insight that may have to offer, in some ways a positive influence on their practice. At the end of the day, including shoes,with the ability to recognize the right of action for each foot and the horse is the measure will be set up as a hoof care provider.
Balance is the most talked about topic in the industry. It 'been hotly debated for centuries and probably will remain for decades to come. My job as a traditional blacksmith me how we were taught to worry about the balance of the horse. And 'This was the review ofThe conventional theory, that sent me a different way. Thanks to me my discoveries with you.
The balance dilemma
Balance, as defined by conventional science farrier is largely based on conjecture, this is a statement that this paper must be defended. How can we expect to obtain consistent and repeatable results, if we do not addiquate tools available? Over the past eight years I have tried to make the necessary tools to respond to development needsToday horse and owner.
It was with the development of the model HPT (High Performance Trim Model) that I have an easily defined reference plane, a plane to note that the results as consistent, repeatable and desirable discovered. But before I explain how I define the balance, I think it's important that we all have a clear understanding of how the balance is seen more frequently in practice, the blacksmiths of today. We make sure we are all on the same page soto speak.
Retrospect studies suggest that was the traditional / conventional base balance is primarily developed with the structural mechanics as the basis. Although in recent years have influenced the study of the kinematics of the way today asked the blacksmith to the foot during flight stride.5 current view is seen farrier asked to achieve a dynamic equilibrium in the quest for high performance by establishing 12 horse.11 Dynamic Balance, will now be farrierdescribes the position of the foot and the first impact will be discussed below.
Although the theme of this work is the equilibrium size, it is important to understand that the balance is used to create the size of the balance function. After the balance to permit the proper execution of the function of stride length and the maintenance of a healthy structure.
STATIC BALANCE: a historical perspective
Static balance or equilibrium of the foot is at rest,detail in numerous publications. Text are references to Ross MW, Dyson SJ, lameness in horses, New York, 2003, because it is a recent publication, and the latest information on the static equilibrium is considered to offer today's farrier and veterinary use. It is recognized that optimal function intuitively perfect shape and balance. This also applies to the basic principles of Applied Equine Podiatry has explained: Structure + Function = Performance
Over the centuriesPractitioners were invented beliefs and ideas on the shape and the static equilibrium, which are often due to the culture and discipline to conclusions about what does not affect the basic functions, and that could lead to problems. Many of these beliefs prior analysis of the modern movement, and as mentioned earlier in this document is based on static mechanics. This view takes into account only the static balance and conformation. I have read several articles that attempts to traditional faith, to be integrated with datamade in modern research, these studies often exposed inconsistencies in the application of traditional geometric scale.
Static equilibrium and conformation (Modern / Traditional)
Viewed from the lateral side, the foot should be straight-pastern axis. The back wall should be parallel to the dorsal surface of the pastern, and when viewed from the side, the wall with the angle of heel that approximate the back wall. The angle of the wall andFoot pastern axis should be variable, often cited steeper between 50 º and 54 º in the forelimb and by about 3 ° in hindlimb13. There are numerous theories that claim to such an extent that the only right angle to the wall back to the front leg 45 degrees it was gone. And 'my humble opinion, that these theories are based on unsubstantiated evidence, and are supported only by speculation, not based on scientific evidence.
It has been suggested that the length of the hoofin the domestic horse is connected, the weight of the horse. On the contrary, studies indicate that the length of the foot of the wild horse, regardless of their weight, the variability is determined by the environment. It can be assumed that the environment probably barefoot horses inside the same way affect wild horse.
Modern texts suggest that the length of the heel in the domestic horse should be shod or barefoot around 1 / 3 of that toe14 15, but again inwild horses varies with the terrain (environment).
An imaginary line that the third metacarpal bone should be cut half the weight of supporting most of the palmar surface of the bead (the corner of the bar). And 'this belief that many farriers have led people to believe that to sustain a feature of the shoe.
When viewed on a lateral radiograph, the dorsal hoof wall and the dorsal surface of the distal phalanx should be parallel to each other. The angle of the solar systemposterior margin of the pedal bone, the floor is 2 º to 10 º 6.16.17.18 area. There are theories and hypotheses are that the angle created by the distal edge of the P3 and the ground should be parallel with the back of your handheld. This belief was supported by the following less than traditional models wild horse. In short, be, my own findings in the report, this exposed corner.
Seen by x-ray dorsopalmar, a lineHalving of the metacarpal and phalanges should halve the foot so that the foot is approximately symmetrical on both sides of the line.
The medial area is often the steepest part, so that the media is also shorter than the side wall. A line between any two points of the coronary band should be comparable drawn parallel to the bottom of the foot. The center of the town coffin should be centered on the bottom of the foot. TheInterphalangeal spaces should be symmetrical.
Seen from the soil surface, the width and length of the hoof capsule of the front foot should be approximately equal. It 'also suggested that it might be a little wider than long. The back foot is always a bit 'longer than wide. The tipping point is best judged from the soil surface and must be removed at the center of the tip. The ideal place to tilt the axis dorsopalmar is controversial. Intraditionally trimmed and shod horses, breakover is positioned where the line of the dorsal hoof wall intersects the ground. With the hoof wall as a reference point, breakover should be located between the dorsal margin of the hoof and the white line. Once more, I want it to be understood that this section is a review of traditional static balance, and not balance according to the HPT Model that will follow shortly.
The relationship of the longitudinal axis of the frog to that of the pedal bone (P3) stays relatively constant compared to the rest of the ground surface structures. The medial and lateral aspects of the ground surface of the foot are symmetrical about the axis of the frog, although slight asymmetry with the lateral side being about 5% wider than the medial side being seen as beneficial. This asymmetry is exhibited in the coronary band, with the medial wall being steeper. The sole should be concave. The frog width should be at least 50% to 67% of the frog length, and the weight bearing surface of the heels should coincide with the widest part of the frog.
Dynamic Balance
Claims that today's practitioner is implementing the practice of dynamic balance based on modern findings may be a bit overstated. Contradictions exposed by these modern motion analysis studies may in fact be a point of confusion.
The concept of dynamic balance is not new. In the late nineteenth century, there was great interest shown in perfecting the stride of the trotting horse. This is substantiated by published works that showcase shoeing to prevent gait problems, such as speedycutting, knee hitting, cross firing, forging and overreaching. Static balance, though considered important, was often disregarded, or at the very least, placed second to that of dynamic balance. Though the term "dynamic balance" was not used, achieving the desired results would often result in what today is defined as dynamic balance.
The modern farrier sciences defines dynamic medial/lateral balance as being achieved when both heels strike the ground simultaneously, and the foot breaks over at the centre of the toe11 12. Dynamic dorsal/palmar balance is achieved when either the heels land slightly before the toe, or the toe and heel land simultaneously. Evidence has been presented that would indicate that one heel commonly lands before the other2. Thus, I believe it would have been very difficult to use observation in attempts to achieve dynamic balance.
It is my belief that dynamic balance will be redefined to include achieving a state of equilibrium of function. As continued research reveals the workings of the equine foot, dynamic balance becomes viable and obtainable through the application of correct dimensional balance coupled with correct environmental stimulus.
The HPT Model (Dimensional balance)
For centuries, the farrier student has been taught how to achieve balance in the equine foot. Teaching the principles of balance varies greatly among teachers and schools, with this leading to an inherent problem; a multitude of difficult to define reference points being left to the interpretation of the student. Achieving balance cannot be compared to mechanics or mathematics. It is not simply completing the formula or outlined task, as there are few true absolutes on the equine foot. Achieving correct balance depends on one's ability to correctly reference a multitude of factors as outlined throughout this paper. Though each dimension listed by tradition has been defined as an absolute, most are a misrepresentation of true balance. Angle of hoof is one such dimension that has been badly misinterpreted. In an effort to justify that which has been interpreted as an absolute, various measuring devices have been developed. The farrier begins to rely on such devices and perceives the reading of the protractor, dividers, T- squares and rulers, as a means to achieve absolute balance. It is impossible to state an absolute such as hoof angle, and then expect anyone to use a device that uses undefined reference points to achieve the same. The protractor and dividers for instance, use reference points that are vague; therefore, any absolute perceived is based solely on the user's interpretation of those points. Example: dividers use the hair line, and protractors use dorsal wall and sole surface, all of which can be deviated to the point that the only absolute that can be stated is that neither can be measured accurately with these traditional tools. Further, traditionally we are taught to use external angles to guide us in achieving balance. We are all aware of the angles involving shoulder to pastern in relationship to the hoofs' dorsal wall, as outlined earlier. Are these absolute, considering conformational defects? What about dorsal wall angle to heel angle, and hairline to ground, and so on, and so on, and so on?
It is true that with years of practice and experimentation, the farrier can capably achieve relative balance. This is a statement often used in defence of the traditional farrier sciences: "leave it to the experts; it takes a long time to learn what is needed to achieve proper hoof balance." There are some farriers out there that have the ability to interpret or read a hoof, and can consistently achieve static balance. Most of these farriers will often admit haven taken many years to get to the point where they can make this claim, and the percentage to those that cannot is overwhelming in my opinion.
Just as we have seen a misinterpretation of the many natural balance theories being practiced, how traditional balance is achieved has been misinterpreted to a far greater extent. By having so many variables being left to one's individual interpretation, it is little wonder there has been such difficulty in defining balance. Therefore, the true definition of balance should be defined as equilibrium of function, resulting in the growth of proper structure, and a sound horse.
The inherent problem is that the traditional farrier sciences do not clearly define dimensional balance, and further do not scientifically support the importance of establishing the correct stimulus for proper structure and function. Yes, there are outlines on how to achieve balance; many are based on ones' ability to visualise what lies beneath (bone structure) and what is proper for balance. Dr Doug Butler, author of "The Principle of Horse Shoeing" and renowned educator, stated in the American Farriers Journal that most farriers have difficulty visualising the internal bone structures, and their relationship to the hoof capsule. I find this remark to be of paramount importance. If the method for establishing balance is based on one's ability to interpret so many variables, and the experts are finding it difficult, then my belief that there is an inherent problem has been confirmed. How then did I overcome these problems?
First I took a long look at how I was taught to establish balance. There were three dimensions that were addressed, all of which have been outlined above. To make things a bit more clear, I will outline them again here.
First is Medial/Lateral balance: having equal height to both heels. Often the T-Square Method of balance is used. This method dictates that a line across each heel bisect a line that follows the vertical axis of the metacarpal bone. We as farriers are instructed to hang the leg of the horse and visualise this line, and trim the heels accordingly.
Second to be addressed is Anterior/Posterior balance: this balance is achieved when the dorsal wall angle matches that of the dorsal surface of the pastern, and that of the shoulder. Often, this is achieved by lowering or raising the heels.
A third dimension is Yaw. Yaw is described as rotational balance, and most often comes into play with the application of the horseshoe, the desire to have the centre of the shoe's toe line up with the centreline of the foot on its ground surface. Yaw is seldom considered when going shoeless, or in the application of the conventional trim.
It should be easier to understand why the guidelines for traditional static balance can be very difficult to apply consistently in the field, considering that each is in actuality defined incorrectly. Traditional definition dictates that conformation of the lower limb dictates distal/proximal balance (height) on the medial/lateral ground plane of the foot, and not medial/lateral balance itself. Whereas, conformation of the shoulder dictates distal/proximal (height) balance on the dorsal/palmar ground plane of the foot, and not Anterior/Posterior balance. Why this practice of balancing has occurred is likely to be due to the inability of the farrier to envision the internal structures of the foot; after all, we do not have x-ray vision. With the lack of understanding of the importance of the soft connective tissue of the foot and its internal arch, it is understandable why the blacksmith would subscribe to statics mechanics, and the balance dictated by the science of the time. As a Traditional Blacksmith, I can understand why the need for such simplicity became acceptable. Having defined angles, which can easily be achieved by removal of structure, is by virtue a definition of simplicity itself. Using the dorsal wall angle to achieve anterior/posterior balance has caused, in my opinion, an oversight in how most farriers address dorsal/palmar balance. Today's farrier does attempt to create dorsal/palmar balance, though all too often, only breakover is addressed. This oversight has led to a disregard for the placement of heel purchase which has proven to be of utmost importance.
Within the introduction of my book, "The Chosen Road," I have included an excerpt from "Artistic Horseshoeing" first published in 1887. The texts suggest that the idea of attaching an iron shoe may have first been suggested by examining some old foot, that in the process of decay of the animal to which it belonged, had naturally, because of its hard substance, survived longer than the flesh or even bone. It is my opinion that this very simplistic view of the equine foot has permeated the farrier sciences to date.
With my review of current accepted beliefs, it is obviously not a far stretch to come to the conclusion that traditional balance terminology was too simplistic and would not suffice. I took it upon myself to redefine the dimensional expressions I would use in the treatment of the equine foot.
It was Einstein who defined four dimensions - height, length, width and time. As an example, I could meet you at the corner of 33rd (W) and 3rd (L) on the 34th floor (H) at three o'clock (T). Balance as outlined by Einstein is also insufficient, as it does not account for rotational balance. If in fact the building we had to enter had a revolving door, then we would have to add rotational balance to the example that I used to define Einstein's dimensions. The revolving door would have to be aligned with the opening in the building for us to enter (Y).
Within the practice of farriery, it has been conceded that the dimension of height on two planes would be sufficient, when coupled with rotational balance. Perhaps this is an observation that I alone hold, but I honestly believe that a more accurate means of achieving dimensional balance in the equine foot is needed.
Applying literal definition to the labels used in the traditional practice of farriery enabled me to define a five dimensional model for the treatment of the equine foot. The model is based in part on the plane created by the distal most surface of the internal arch within the healthy foot. Four of these dimensions were first outlined in my book, the Chosen Road, and a means to achieve a plane of reference for these dimensions is clearly detailed there.
The four dimensions are: (W) medial/lateral balance; (X) dorsal/palmar balance (Y) yaw or rotational balance and (Z) distal/proximal balance on both the medial/lateral and dorsal/palmar plane.
W Medial/Lateral balance is achieved by having the hoof capsule centered left to right of the center line of the internal arch and coffin joint
X Dorsal/Palmar balance is achieved by having proper heel and toe placement in relationship to the axis of the limb (coffin joint)
Y Balanced Yaw or rotational balance is achieved when the hoof capsule is centered on the established center line of the internal arch and coffin joint
Z Distal/proximal balance is achieved when the heel and toe planes are parallel to the established live sole plane, slightly distal to the live/viable sole.
It should become clear that if our goal is to have repeatable results in our attempt to achieve static balance, then a minimum of four dimensions are required.
The HPT Model (Dynamic Balance)
Dynamic balance in the HPT Model is far more than simply having the ground surface of the hoof capsule making parallel contact with the ground at the time of initial contact. Dynamic balance can only be achieved with the understanding that providing correct stimulus is the means by which we can achieve equilibrium of functions. Dynamic balance as it pertains to the HPT Model is equilibrium of functions. When equilibrium of functions is achieved, ground parallel contact does occur. Ground parallel contact coupled with the delivery of deliberate and correct stimulus results in the maintenance or return of vital structure and function. What correct stimulus is has been defined within the Suspension Theory of Hoof Dynamics6.
Conclusion
While discussing my speaking here at the summit with Frank Lessiter, I presented him with an analogy that I use in my teaching of Applied Equine Podiatry. It goes something like this: often the aircraft is used to define conventional balance. The aircraft is said to be in balance when it is parallel to the ground plane. The dimensions referred to are pitch, roll and yaw; they equate to anterior/posterior, medial/lateral and yaw. This is a good example of conventional balance, and the model we as farriers are ask to use. I though, have a problem with this example. The control of the plane is in the hands of the pilot, and if at any point in time, the ground is not visible, how does he maintain balance with the ground? A simple question and a simple answer: he uses instrumentation. The question now becomes: what if the instruments are not calibrated correctly? A simple answer: he prays he has a real strong sense of direction. My point is this, having the hoof capsule balanced to the ground plane does not necessarily mean that the instruments are calibrated correctly. It is the relationship of the epidermal layer to the dermal layer that will determine neurological function. If we can determine the plane of the dorsal/distal dermal layer (internal arch), we then can balance the hoof (epidermal) to that of the foot (dermal). We then can essentially calibrate the instrumentation that the horse (pilot) uses to maintain balance of stride and function.
It all starts with providing correct stimulus via a correctly balanced hoof capsule. My studies have revealed that creating balance of hoof capsule to that of the Internal Arch will aid in achieving equilibrium of functions19. Redefining the terminology used to define dimensional balance in the equine foot allows us to be more precise in our assessment of hoof capsule balance. With the return of correct functions comes the return of correct structure.
Simply stated: Structure + Function = Performance
In defence of an industry that has served me well, I would like to state that I believe "Shoeing is not the necessary evil that it is proclaimed to be, it is the lack of knowledge that makes shoeing necessary that is the true evil."
As I go about my daily routines as a professional hoof care provider, I find comfort in knowing that I never have to worry about becoming arrogant; god has made me a student of the greatest teacher of humility I could ever wish for, our true client, the horse. It never ceases to amaze me, when you think you have all the answers, the horse will present another question.
